• Email Support info@universalpeak.com.my
  • Call Support +603 2770 5715
  • Office Location Suite A-28-10, Menara UOA Bangsar, Kuala Lumpur
  • LinkedIn Follow Us
Electrical Repair & Engineering Services | Universal Peak

Posts

PQE Technical Team & Warehouse

Project: PQE Technical Team & Main Warehouse Equipment’s

Place: PQE Warehouse

PQE Total Manpower Force Table:

Technical training conducted by UP’s GIS Specialist, Mr Tony.

Mr Tony @ Antal Polgar is our Hungarian expert in GIS system with more than 40 years’ experience in GIS installation, overhaul and service.  Previously he has worked for Ganz Ansaldo in Hungary for more than 40 years. He has successfully conducted maintenance and service jobs for more than 30 substations in Malaysia. Currently he is working with Power Quality Enhancement Sdn. Bhd. (PQE) which is part of the UP Holdings. PQE has gained much from him as since he is our GIS specialist he ensures to lead and train a number of technicians and fitters in the Technical Team.


Equipment Testing:

Dilo Mobile Vacuum Pump

The unit is used for evacuation of air or nitrogen from switchgear. The 40 m³/h vacuum pump (standard version) enables a final vacuum of < 1 mbar. Thus it is guaranteed that no air/gas mixture can be generated and the excellent insulation properties of SF 6  are maintained.

Dilo Gas Recovery Cart B058R01

The model series comes with a vacuum compressor or suction pump for liquid storage. SF6 gas can be recovered to a final vacuum of < 5 mbar or 1 mbar and exceeds IEC 62271-4 regulations by far.

Dilo Mini Compressor

Dilo Sf6 Leak Detector

To detect any leakage of sf6 gas after the maintenance.

Dilo Density monitor

Dilo Pre-Filter

Doble Vanguard S800-S3 CB Analyzer

Fully analyses the circuit breaker’s performance by measuring main contact and resistor contact time, stroke, velocity, over-travel, bounce back and contact wipes. It performs dynamic contact resistance test.

Dilo Vanguard Primary Current Injection Device PCI-600

The VIC Model PCI-600 is a programmable, high-current source that is designed specifically for utility-substation applications.

This alternating current(ac) test device is used primarily for injection testing of protective relays.

This same device can also be used for testing thermal, magnetic and solid-state motor protection relays and molded-case circuit breakers.

The PCI-600 is versatile and can also be used in many other applications that requires a high-
current source.

Wika SF6 Gas Analyzer

The SF 6  gas analysis instrument model GA11 is an innovative and inexpensive instrument for determining the SF 6  gas quality.

Model GA11 can measure the concentration of up to seven parameters.

Images by: Mohd Nor Azrin Bin Mohd Folas

No Comments :

Leave a Reply :

* Your email address will not be published.